Carbolite Data

Twin Wall Polycarb Awnings

Flat window Awnings

car_1-32

These offer a traditional yet sleek and modern look and the system allows for the awning to be set at any angle  you desire. Because the rear receiving channel is affixed and the awning simply clicks into the channel this allows you to set the pitch to suit your needs. Available from 960mm to 1600mm projections:

If your projection requirement is greater than this, you will need to consider a Patio Cover.Flat window awnings are available in a variety of mix and match colour choices to suit all manner of older style and modern homes.

8mm twin walled polycarbonate comes in five colours and the aluminium joining bars come in four colours. Keep in mind we are able to powder coat to any special colour at an extra cost.Each polycarbonate sheet with the H Bar measures 725mm from centre to centre. 2 sheets start at 1500mm wide and then simply add 725mm for each panel to determine the width you need. Polycarbonate sheeting has UV protection on both sides of the sheets for greater protection.The arm attachment is a simple bracket system. Simply fastened the bracket to the wall and the bracket slips into the 38mm RHS arm. The arms can be cut to any size on site to determine your pitch. Twin walled polycarbonatePolycarbonate twin wall material has special advantages in relation to temperature and sound insulation. The middle air gap between the flutes produces lower thermal losses than single skin translucent material. Twin wall polycarbonate can withstand impact (such as hail) but under certain stipulations. Please contact our installation specialist for further information on conditional specifications.

Bull Nose Awnings

Polycarbonate_Awnings-Carbolite-window_awnings-door_awnings-_sydney-warriewood

These awnings offer a traditional colonial look with the awning system allowing the awnings to be set at any angle. Because the rear receiving channel is affixed and the awning simply clicks into the channel this allows you to set the pitch to suit your needs.

If your projection requirement is greater than this, you will need to consider a Patio Cover.

The bull nose is created by heat forming sheets. The sheet is placed in a heat forming oven which then heats and softens the sheet. The sheet is then wrapped around a barrel attachment and cooled. The final result is a perfectly formed curve. The radius is set at 380mm which is quite a tight curve.

If you have an area that has a limited head height a bull nosed awning is the perfect solution as they can be placed on smaller falls. Recommended falls are; Bull nosed awnings are available in a variety of mix and match colour choices to suit all manner of older style and modern homes. 8mm twin walled polycarbonate comes in five colours and the aluminium joining bars come in four colours. Keep in mind we are able to powder coat to any special colour at an extra cost.

Each polycarbonate sheet with the H Bar measures 725mm from centre to centre. 2 sheets start at 1500mm wide and then simply add 725mm for each panel to determine the width you need and we can cut the sheets to any size you ant . the polycarbonate sheeting has UV protection on both sides of the sheets for greater protection.

The arm attachment is a simple bracket system. Simply fastened the bracket to the wall and the bracket slips into the 38mm RHS arm. The arms can be cut to any size on site to determine your pitch.

0421 074 939